LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Elantra Value Edition >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Canister Close Valve (CCV) >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Remove the canister assembly.

    (Refer to Emission Control System - "CANISTER ")

  3. Remove the installation bolt (A), and then remove the air filter (B).
    Fig 1: Locating Bolt And Air Filter
    G12024949Courtesy of HYUNDAI MOTOR AMERICA
  4. Release the lever (A), and then separate the canister close valve (B) from the fuel tank air filter after rotating it in the direction of the arrow in the figure (Fig 3).
    Fig 2: Releasing Lever
    G12024950Courtesy of HYUNDAI MOTOR AMERICA
    Fig 3: Separating Canister Close Valve From Fuel Tank Air Filter
    G12024951Courtesy of HYUNDAI MOTOR AMERICA
  5. Install a new fuel tank air filter in accordance with the reverse order.
scientia non olet · About LEMON Manuals