Repair Procedures: Installation
CAUTION:
Do not reuse the shear bolts.
When installing the new shear bolts to the electronic steering column lock, tighten the shear bolts until its head is cut off.
When installing the new shear bolts to the electronic steering column lock, tighten the shear bolts until its head is cut off.
- Install the key lock cylinder.
- Install the key warning switch.
- Install the key warning/immobilizer connector.
- Connect the ignition switch connector after Install the ignition switch.
- Install the multifunction switch.
- Install the steering column shrouds.
- Install the driver crash pad lower panel.
- Connect the negative (-) battery terminal.