LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2017 >> Tucson Value, FWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition Switch Assembly >> Ignition Switch >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the driver crash pad lower panel.

    (Refer to Body - "CRASH PAD LOWER PANEL ")

  3. Remove the steering column upper and lower shroud panel.

    (Refer to Body - "STEERING COLUMN SHROUD PANEL ")

  4. Remove the multifunction switch.

    (Refer to Body Electrical System - "MULTIFUNCTION SWITCH ")

  5. Remove the key warning/immobilizer connector (A).
    Fig 1: Removing Key Warning/Immobilizer Connector
    G12043337Courtesy of HYUNDAI MOTOR AMERICA
  6. Insert key and turn it to ACC position.
  7. Pushing lock pin (A) with the awl.
    Fig 2: Pushing Lock Pin With AWL
    G12043338Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the key lock cylinder (A).

    B: Key warning switch

    C: Ignition switch connector

    Fig 3: Removing Key Lock Cylinder
    G12043339Courtesy of HYUNDAI MOTOR AMERICA
  9. Disconnect the ignition switch connector (A).
    Fig 4: Disconnecting Ignition Switch Connector
    G12043340Courtesy of HYUNDAI MOTOR AMERICA
  10. Remove the ignition switch (A) after loosening the mounting bolts.
Fig 5: Removing Ignition Switch Mounting Bolts
G12043341Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals