Repair Procedures: Disassembly

Loosen the screw and then separate the lower cover (A) from the steering wheel body.

Fig 1: Separating Lower Cover From Steering Wheel Body
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the paddle shift connector (A) and then remove lower cover (B).

Fig 2: Disconnecting Paddle Shift Connector
Courtesy of HYUNDAI MOTOR AMERICA
Remove the paddle shift (A).

Fig 3: Removing Paddle Shifter
Courtesy of HYUNDAI MOTOR AMERICA
Disconnect the all connector and then remove the wiring (A).

Fig 4: Disconnecting Connectors And Removing Wiring
Courtesy of HYUNDAI MOTOR AMERICA
Loosen the screw and then remove the remote control switch assembly (A).

Fig 5: Removing Remote Control Switch Assembly Screws
Courtesy of HYUNDAI MOTOR AMERICA

Fig 6: Locating Remote Control Switch Assembly
Courtesy of HYUNDAI MOTOR AMERICA
Reassemble is the reverse of the disassemble.