[In The Case Of Installing Used ECM]
- Perform "ECM NEUTRAL MODE " procedure with GDS.
(Refer to "IMMOBILIZER SYSTEM DIAGNOSIS (PHEV) ")
- After finishing "ECM NEUTRAL MODE ", perform "TEACHING MODE PROCEDURE DESCRIPTION (STEP BY STEP)
" procedure with GDS.
(Refer to "IMMOBILIZER SYSTEM DIAGNOSIS (PHEV) ")
- Perform "ECM NEUTRAL MODE " procedure with GDS.
(Refer to "SMART KEY ")
- After finishing "ECM NEUTRAL MODE ", insert the key (or press the start button) and turn it to the IGN ON and OFF position. Then the ECM learns the smart key information automatically.