Position Sensor: Troubleshooting
| Major Symptom | Expected Cause | Items to Check and Measures |
|---|---|---|
| Shock when shifting to and from D/R Motor run-up when shifting to and from D/R |
Faulty position sensor "N" setting | Use the "N" setting jig and adjust the "N" setting. (Refer to "Automatic Transaxle System - POSITION SENSOR ") |
| Faulty oil pressure in the valve body | Replace valve body assembly or inspect/replace transaxle assembly | |
| Faulty engine start Current gear not indicated in the Cluster Warning Lamp ON Engine stall while stopped Creeping not possible Auto parking release disabled |
Faulty CAN terminating resistance/circuit | Check TCM/battery management system module. |
| Check TCM wiring connector connection. | ||
| Faulty position sensor circuit fuse | Check fuse and junction box terminal, and repair. | |
| Faulty position sensor wiring connector | Check for foreign substance in the wiring connector, and check for gap on the terminal. | |
| Check sealing on unused pin, and check for corrosion on the terminal. | ||
| Faulty reverse lamp circuit | Check reverse lamp ground, and reassemble if necessary. | |
| Faulty position sensor wiring ground | Check wiring ground, and reassemble if necessary. | |
| Position sensor faulty code | Inspect in accordance with the inspection flow, then replace position sensor if necessary. |