LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2021 >> Veloster 2.0, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System - 2.0L >> Camshaft Position Sensor (CMPS) >> Repair Procedures >> Removal >> Bank 1/Intake
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Bank 1/Intake

  1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
  2. Disconnect the camshaft position sensor connector (B) after removing the clip (A).
  3. Remove the installation bolt (C), and then remove the sensor.
G13055546Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals