LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2021 >> Venue SE >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System >> Variable Force Solenoid (VFS) >> Repair Procedures >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Installation

NOTE:
  • Install the component to the specified torque.
  • Note that internal damage may occur when the component is dropped. If the component has been dropped, inspect before installing.
  • Do not use any dropped variable force solenoid (VFS) valve.
  • Note below cautions when installing variable force solenoid (VFS) valve.
  1. After replacing the O-ring (A) of variable force solenoid (VFS) valve, apply engine oil on new O-ring (A).
    G14694501Courtesy of HYUNDAI MOTOR AMERICA
  2. Push variable force solenoid (VFS) valve up to the timing chain cover, and temporarily tighten the bolt.
  3. Tighten the variable force solenoid (VFS) valve to the specified torque.
  1. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals