LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Hyundai >> 2021 >> Venue SEL >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> IVT Control System >> Shift Lever >> Repair Procedures >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Repair Procedures: Removal

  1. Turn OFF ignition switch and then disconnect the battery negative (-) cable.
  2. Remove the shift lever knob & boots (A).
    G14694852Courtesy of HYUNDAI MOTOR AMERICA
  3. Remove the floor console assembly.

    (Refer to Body - "FLOOR CONSOLE ")

  4. Separate the clip (A) of fixed wiring.
  5. Disconnect the connector (B).
    G14694853Courtesy of HYUNDAI MOTOR AMERICA
  6. Separate the air duct (A) from the both side.
    G14694854Courtesy of HYUNDAI MOTOR AMERICA
  7. Separate the shift cable.
    1. Remove the snap pin (A).
    2. Separate the shift cable (B).
      G14694855Courtesy of HYUNDAI MOTOR AMERICA
    CAUTION:
    • When installing the shift cable, Lug (A) must assemble upward.
      G14694856Courtesy of HYUNDAI MOTOR AMERICA
    • Bending area (A) must assemble the front.
      G14694857Courtesy of HYUNDAI MOTOR AMERICA
  8. Remove the bolts and then shift lever assembly (A).

    Tightening torque: 

    8.8 - 13.7 N.m (0.9 - 1.4 kgf.m, 6.5 - 10.1 lb-ft)

    G14694858Courtesy of HYUNDAI MOTOR AMERICA
scientia non olet · About LEMON Manuals