Intermittent Failures

Intermittent failures may cause CHECK ENGINE light to flicker or glow and go out after intermittent fault goes away. However, corresponding trouble code will be stored in ECU memory. Not all trouble codes will illuminate CHECK ENGINE light. If related fault does not reoccur within a certain time frame, related trouble code will be erased from ECU memory. Intermittent failures may be caused by sensor, connector or wiring related problems. See INTERMITTENTS in TESTS W/O CODES article in the ENGINE PERFORMANCE Section.

NOTE: Follow proper diagnostic routine when diagnosing system. See DIAGNOSTIC ROUTINE table.

DIAGNOSTIC ROUTINE

Procedure

Order

Basic Diagnostic Procedures

1st

Entering Diagnostics

2nd

Retrieving Trouble Codes

3rd

Symptoms ⁽¹⁾

4th

Intermittents ⁽¹⁾

5th

⁽¹⁾	Symptoms and intermittents are covered in TESTS W/O CODES article in the ENGINE PERFORMANCE Section.