LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 1996 >> J30 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests 3.0L >> Fuel System >> Fuel Control >> Fuel Injector
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Injector

  1. With engine idling, individually disconnect injector harness connectors. Each injector should produce an equal RPM drop.
  2. With engine cranking or while manually rotating crankshaft position sensor (harness connected with ignition on), listen for clicking or feel for vibration, indicating injectors are triggering. If injectors are not triggering, check power and ground circuits and crankshaft position sensor signal to ECM.
  3. Disconnect fuel injector connector. Using ohmmeter, check across injector terminals for 10-14 ohms resistance. If 10-14 ohms is not indicated, replace fuel injector.
  4. Check for injector leaks by removing injector fuel rail. Keep fuel hose and all injectors connected to rail. Turn ignition on. DO NOT  start engine. Observe injector tips for leakage. If injectors drip, replace faulty injectors.
scientia non olet · About LEMON Manuals