LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 1998 >> Q45 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Computerized Engine Controls >> Powertrain Control Module (Pcm) >> Ground Circuits (I30)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ground Circuits (I30)

  1. Using a DVOM, measure resistance between ground and PCM terminals No. 10, 19, 25, 32, 108, 116 and 124 by backprobing. See Figure . Resistance should be zero ohms at all terminals. If resistance is as specified, go to next step. If resistance is not as specified, repair open or poor connection in appropriate circuit.
  2. Using a DVOM, connect negative lead of DVOM to a good ground. Using positive lead of DVOM, backprobe at PCM terminals No. 10, 19, 25, 32, 108, 116 and 124. With vehicle running, DVOM should indicate less than one volt at all terminals. If voltage is as specified, ground circuits are okay at this time. If voltage is not as specified, repair short to voltage in appropriate circuit.