Setting SRT Codes
- With scan tool connected to Datalink Connector (DLC), start engine and allow vehicle to warm to operating temperature (coolant temp. at 158°F). Drive vehicle according to procedure described. See Fig 1.
- Perform driving procedure one or more times. If driving procedure is interrupted, repeat procedure. On A/T models, operate vehicle with shift lever in "D" position with overdrive on. On M/T models, shift gears at specified intervals. See M/T SHIFT POINTS.
M/T SHIFT POINTS
| Application | Shift Speed MPH | |
|---|---|---|
| Acceleration Below 4000 Ft. Elevation | ||
| 1-2 | 13 | |
| 2-3 | 23 | |
| 3-4 | 33 | |
| 4-5 | 39 | |
| Cruising Speed Below 4000 Ft. Elevation | ||
| 1-2 | 13 | |
| 2-3 | 16 | |
| 3-4 | 27 | |
| 4-5 | 36 | |
| Acceleration Above 4000 Ft. Elevation | ||
| 1-2 | 15 | |
| 2-3 | 25 | |
| 3-4 | 40 | |
| 4-5 | 45 | |
| Maximum Speed/Gear | ||
| 1 | 30 | |
| 2 | 60 | |
| 3 | 90 | |