All Remote Controller Functions Inoperative
- Check remote controller battery. Perform diagnostic procedure 1. See Figure . If remote controller battery is okay, go to next step. If remote controller battery is defective, replace remote controller battery.
- Enter Identity (ID) code of a different or new remote controller. See PROGRAMMING REMOTE CONTROLLER . If Nissan CONSULT scan tool was used for programming, go to next step. If Nissan CONSULT scan tool was not used for programming, go to step 4 .
- If ID code cannot be entered, perform diagnostic procedure 2. See Figure . If ID code can be entered, retest system. If system functions normally, replace multi-remote controller. If system does not function normally, perform diagnostic procedure 3. See Figure and Figure .
- If ID code can be entered, replace multi-remote controller. If ID code cannot be entered, perform diagnostic procedures 2 and 3. See Figure , Figure and Figure .