Setting SRT Codes

To set all SRT codes as complete, drive vehicle according to procedure shown in illustration. See Fig 1. Perform driving procedure one or more times. If driving procedure is interrupted, repeat procedure. On A/T models, operate vehicle with shift lever in "D" position and overdrive turned on. On M/T models, shift gears at suggested speeds. See SUGGESTED SHIFT SPEEDS (M/T)  table. DO NOT exceed maximum suggested speed in any gear. See MAXIMUM SPEED FOR EACH GEAR  table.

Fig 1: Setting System Readiness Test (SRT) Codes

Courtesy of NISSAN MOTOR CO., U.S.A.