DTC P0325: Knock Sensor: Notes
NOTE:
Freeze frame data will not be stored in the ECM for the knock sensor. The MIL will not light for a knock sensor malfunction.
NOTE:
Using the following diagnostic procedure assumes the presence of a current (hard) DTC or the ability to duplicate the setting of the DTC using DTC confirmation test(s), intermittent recreation procedures or a test drive under conditions stored in freeze frame data. See TESTING PROCEDURE under SELF-DIAGNOSTIC SYSTEM in SELF-DIAGNOSTICS - INTRODUCTION article. If DTC cannot be duplicated, proceed to TROUBLE SHOOTING - NO CODES article for diagnosis by symptom.