DTC P0510: Closed Throttle Position (TP) Switch: Notes

NOTE: Using the following diagnostic procedure assumes the presence of a current (hard) DTC or the ability to duplicate the setting of the DTC using DTC confirmation test(s), intermittent recreation procedures or a test drive under conditions stored in freeze frame data. See TESTING PROCEDURE under SELF-DIAGNOSTIC SYSTEM in SELF-DIAGNOSTICS - INTRODUCTION article. If DTC cannot be duplicated, proceed to TROUBLE SHOOTING - NO CODES article for diagnosis by symptom.

NOTE: Closed Throttle Position (TP) switch is a part of Throttle Position (TP) sensor.