DTC P1447: EVAP Control System Purge Flow Monitoring: Notes

NOTE: If DTC P0510 is also present, perform diagnosis for DTC P0510 first.

NOTE: Using the following diagnostic procedure assumes the presence of a current (hard) DTC or the ability to duplicate the setting of the DTC using DTC confirmation test(s), intermittent recreation procedures or a test drive under conditions stored in freeze frame data. See TESTING PROCEDURE under SELF-DIAGNOSTIC SYSTEM in SELF-DIAGNOSTICS - INTRODUCTION article. If DTC cannot be duplicated, proceed to TROUBLE SHOOTING - NO CODES article for diagnosis by symptom.