Trunk Lid Opener Operation

Power is supplied at all times

• through 20A fuse [No. 15, located in the fuse block (J/B)]
• to trunk lid opener actuator terminal 1.

When a TRUNK OPEN signal is sent from electronic key without the electronic key inserted in the ignition key cylinder, if the trunk lid opener cancel switch is in the ON position, ground is supplied

• through 10A fuse [No.3, located in the fuse block (J/B)]
• to trunk lid opener relay
• through trunk lid cancel switch terminals 1 and 2, and
• through BCM terminal 109

Then power and ground are supplied, trunk lid opener actuator opens trunk lid.