Trunk Lid Opener Cancel Switch Check

CHECK POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect trunk lid opener cancel switch connector.
3. Check voltage between opener cancel switch harness connector M117 terminal 1 (G) and body ground.
  : Battery voltage should exist.
OK or NG?
1. OK >> GO TO 2.
2. NG >> Check the following
  - Trunk lid opener relay.
  - Harness for open or short between trunk lid opener cancel switch and trunk lid opener relay.
Fig 1: Checking Power Supply Circuit - Trunk Lid Opener Cancel Switch
Courtesy of NISSAN MOTOR CO., U.S.A.
CANCEL SWITCH INSPECTION.
Check continuity between trunk lid opener cancel switch terminals 1 and 2.

Fig 2: Cancel Switch Terminals 1 And 2 Continuity Table
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: Inspecting Cancel Switch
Courtesy of NISSAN MOTOR CO., U.S.A.

OK or NG?
1. OK >> GO TO 3.
2. NG >> Replace trunk lid opener cancel switch.
CHECK HARNESS CONTINUITY
1. Disconnect BCM connector.
2. Check continuity between BCM harness connector M4 terminal 109(LG) and trunk lid opener cancel switch harness connector M117 terminal 2(LG).
  : Continuity should exist.
OK or NG?
1. OK >> Trunk lid opener cancel switch is OK.
2. NG >> Repair or replace harness.
Fig 4: Checking Harness Continuity - Trunk Lid Opener Cancel Switch
Courtesy of NISSAN MOTOR CO., U.S.A.