Work Flow
- Check the symptom and customer's requests.
- Understand the outline of system. Refer to "SYSTEM DESCRIPTION ".
- Perform the preliminary check. Refer to "PRELIMINARY CHECK ".
- Perform the communication inspection. If CONSULT-II is used, Refer to "IVMS COMMUNICATION INSPECTION ". If CONSULT-II is not used, refer to COMMUNICATION DIAGNOSIS . Is the communication diagnosis result OK? If OK, GO TO step 7 . If NG, GO TO step 5.
- Repair or replace depending on the diagnosis result.
- Perform the communication diagnosis again. If CONSULT-II is used, Refer to "IVMS COMMUNICATION INSPECTION ". If CONSULT-II is not used, Refer to "COMMUNICATION DIAGNOSIS ". Is communication diagnosis result OK? If OK, GO TO step 7. If NG, GO TO step 5 .
- Referring to Trouble diagnosis chart, repair or replace the cause of the incident. Refer to "TROUBLE DIAGNOSIS CHART BY SYMPTOM ".
- Does the remote keyless entry system operate normally? If it operates normally, GO TO step 9. If NG, GO TO step 7 .
- Inspection end.