LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2002 >> Q45 >> Repair and Diagnosis >> Brakes >> Anti-Lock/Traction Control >> Trouble Diagnosis >> Functions Of Consult-II >> Data Monitor >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Data Monitor: Procedure

  1. Turn the ignition switch OFF.
  2. Connect the CONSULT-II connector to the vehicle-side data link connector.
  3. Turn the ignition switch ON.
  4. Touch "START"on the display.
  5. Touch "VDC"on the display.
    NOTE: Just after the engine is started, or the ignition switch is turned ON, "VDC" may not be displayed on the system selection screen even if "START" is touched. In this case, start the self-diagnosis again from step  2 .
  6. Touch "DATA MONITOR".
  7. Return to the monitor item selection screen and touch any one of the following: "C/U INPUT ITEM", "MAIN ITEM" or "ITEM MENU SELECTION". See ITEMS TO BE DISPLAYED  .
  8. Touch "START".
  9. Screen of data monitor is displayed.
scientia non olet · About LEMON Manuals