LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2002 >> Q45 >> Repair and Diagnosis >> General Information >> Computer Relearn >> Computer Relearn Procedures - Import >> HONDA >> System Readiness Test Codes >> EGR Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EGR Monitor

NOTE: Once procedure is started DO NOT turn ignition off. When negative battery cable is disconnected, all readiness test codes are cleared.
  1. Connect scan tool to DLC. Start engine, and hold at 3000 RPM under no load condition with transaxle in Park or Neutral until radiator cooling fan comes on.
  2. Drive vehicle at a steady speed between 50-62 MPH with transaxle in D4 position for more than 10 seconds.
  3. With transaxle in D4 position, decelerate from 62 MPH by completely releasing throttle for at least 5 seconds. If engine is stalls or is stopped during this part of the procedure, repeat procedure starting in step  2. After procedure is complete, use scan too to check readiness code.
scientia non olet · About LEMON Manuals