Synchronization Of Sliding/Tilt-Up Roof

Synchronization must be performed whenever desynchronization occurs (battery disconnected or control module replaced). Synchronization is necessary for convenience opening and closing of sliding/tilt-up roof.

To synchronize sliding/tilt-up roof, press sliding roof switch forward opening sliding/tilt-up roof to full tilt up position. After roof reaches full tilt-up position, maintain pressure on switch for 5 seconds. When DCM detects motor lock-up for specified period, position counter is reset to zero. Sliding/tilt-up roof is now synchronized, allowing sliding roof panel to stop before mechanical limit stop is reached.