Work Support Mode
WORK SUPPORT MODE
| Work Item | Condition |
|---|---|
| Fuel Pressure Release | Fuel Pump Will Stop By Pressing START During Idling. |
| IDLE AIR VOL Learn | The Idle Air Volume That Keeps The Engine Within The Specified Range Is Memorized In ECM |
| Self-Learning Cont | The Coefficient Of Self-Learning Control Mixture Ratio Returns To The Original Coefficient |
| EVAP System Close | Close The EVAP Canister Vent Control Valve To Make EVAP System Close Under: IGN SW ON Engine Not Running, Ambient Temperature Is Above 32°F (0°C). No Vacuum And No High Pressure In EVAP System, Fuel Tank Temp. Is More Than 32°F (0°C). Within 10 Minutes After Starting EVAP SYSTEM CLOSE, When Trying To Execute EVAP SYSTEM CLOSE Under The Condition Except Above, CONSULT- II Will Discontinue It And Display Appropriate Instruction. When Starting Engine, CONSULT-II May Display BATTERY VOLTAGE IS LOW, CHARGE BATTERY, Even In Using Charged Battery. |
| Target IDLE RPM ADJ | Idle Condition |
| Target IGN TIM ADJ | Idle Condition |