LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2003 >> FX45 >> Repair and Diagnosis >> Electrical >> Body Electrical >> IPDM E/R (Intelligent Power Distribution Module Engine Room) >> Consult-II >> Auto Active Test >> Operation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Operation Procedure

  1. Close hood front door RH and lift wiper arms away from windshield (to prevent glass damage by wiper operation).
    NOTE: When auto active test is performed with hood opened, sprinkle water on windshield beforehand.
  2. Turn ignition switch OFF.
  3. Turn ignition switch ON and, within 20 seconds, press front door switch LH 10 times. Then turn ignition switch OFF.
  4. Turn ignition switch ON within 10 seconds after ignition switch OFF.
  5. When auto active test mode is actuated, horn chirps once.
  6. After a series of operations is repeated three times, auto active test is completed.
    NOTE: When auto active test mode has to be cancelled halfway, turn ignition switch OFF.
    CAUTION: Be sure to inspect BL-52, "Check Door Switch" when the auto active test cannot be performed.
scientia non olet · About LEMON Manuals