DTC Confirmation Test
NOTE:
Before proceeding, ensure battery voltage is more than 10 volts at idle.
- Turn ignition on. Select DATA MONITOR with scan tool.
- Check that COOLAN TEMP/S is above 50°F (10°C). If it is above 50°F (10°C), test result is okay. If it is below 50°F (10°C), go to next step.
- Start engine and run it for 65 minutes at idle speed.
- If COOLAN TEMP/S increases to more than 50°F (10°C) within 65 minutes, stop engine. Test result is okay. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE .