Work Flow
- Check the symptom and customer's requests.
- Understand the system description. Refer to SYSTEM DESCRIPTION .
- Perform the preliminary check, refer to PRELIMINARY CHECK .
- Perform the CAN communication inspection using CONSULT-II, refer to CONSULT-II FUNCTION
- Perform the self-diagnosis. Refer to CAN COMMUNICATION INSPECTION USING CONSULT-II (SELF-DIAGNOSIS) .
- Repair or replace depending on the self-diagnostic results.
- Based on the trouble diagnosis chart, repair or replace the cause of the malfunction. Refer to SYMPTOM CHART .
- Does the automatic drive positioner system operate normally?
If it is normal, GO TO 9.
If it is not normal, GO TO 3.
- INSPECTION END