System Description: Notes
Power is supplied at all times:
- from 40A fusible link (letter I , located in the fuse and fusible link box)
- to circuit breaker terminal 1
- through circuit breaker terminal 2
- to power window relay terminal 3
- to front power window main switch terminal 4
- to front power window switch RH terminal 6
- from 10A fuse [No. 13, located in the fuse block (J/B)]
- to smart entrance control unit terminal 49
With ignition switch in ON or START position, power is supplied:
- through 10A fuse [No. 10, located in the fuse block (J/B)]
- to rear power window switch LH and RH terminal 7
- to smart entrance control unit terminal 27
Ground is supplied to power window relay terminal 1:
- through body grounds M9, M25 and M87
Ground is supplied to rear power window switch LH terminal 8:
- through body grounds B7 (with TCS) or B78 (with VDC) and B46 (with rear sunshade), or B12 (without rear sunshade)
Ground is supplied to rear power window switch RH terminal 8:
- through body grounds B 106 and B 127
The power window relay is energized and power is supplied:
- through power window relay terminal 5
- to front power window main switch terminal 11,
- to front power window switch RH terminal 13,
- to rear power window switch LH and RH terminals 5