Diagnostic Procedure
- If using CONSULT-II, go to next step. If using generic scan tool, go to step 3 .
- Turn ignition on. Select SELF-DIAG RESULTS mode with CONSULT-II. Press ERASE. Perform DTC CONFIRMATION TEST "A" again. If 1st trip DTC is detected, replace ECM. If 1st trip DTC is not detected, test is complete.
- Turn ignition on. Select MODE 4 with scan tool. Press ERASE. Perform DTC CONFIRMATION TEST "A" again. If 1st trip DTC is detected, replace ECM. If 1st trip DTC is not detected, test is complete.