DTC Confirmation Test
- Start engine. Ensure TCS is turned off. Select DATA MONITOR mode with scan tool. Drive vehicle at more than 19 MPH for 5 consecutive seconds.NOTE: Vehicle may be driven on road or in shop with drive wheels lifted.
- If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE . If 1st trip DTC is not detected, go to next step.
- While driving vehicle at more than 19 MPH, depress brake pedal for more than 5 seconds, without allowing vehicle speed to drop to 19 MPH.
- If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE . If 1st trip DTC is not detected, system is okay at this time.