DTC P0117 & P0118: ECT Sensor
NOTE:
When the fail-safe system for ECT sensor is activated, the cooling fan operates while engine is running.
Engine coolant temperature will be determined by ECM based on the time after turning ignition switch "ON" or "START". CONSULT-II displays the engine coolant temperature decided by ECM. See ENGINE COOLANT TEMPERATURE CONDITION table.
ENGINE COOLANT TEMPERATURE CONDITION
| Condition | (1) Engine Coolant Temperature Decided | ||
|---|---|---|---|
| Just As Ignition Switch Is Turned ON Or Start | 104°F (40°C) | ||
| More Than About 4 Minutes After Ignition ON Or Start | 176°F (80°C) | ||
| Except As Shown Above | 104-176°F (40-80°C) (Depends On The Time) | ||
|
|||