Brake Control System
- Precautions
- Preparation
- On-Vehicle Service
- System Description
- Can Communication
- Trouble Diagnosis
- How to Proceed With Diagnosis
- Component Installation Location
- Schematic
- Wiring Diagram - VDC -
- Control Unit Input/Output Signal Standard
- CONSULT-II Functions
- For Fast and Accurate Diagnosis
- Basic Inspection
- Inspection 1 Wheel Sensor System
- Inspection 2 Engine System
- Inspection 3 VDC/TCS/ABS Control Unit System
- Inspection 4 Pressure Sensor and Circuit Between Pressure Sensor and VDC/TCS/ABS Control Unit
- Inspection 5 Steering Angle Sensor and Circuit Between Steering Angle Sensor and VDC/TCS/ABS Control Unit
- Inspection 6 Yaw Rate/Side G-Sensor and Circuit Between Yaw Rate/Side G-Sensor and VDC/TCS/ABS Control Unit
- Inspection 7 Solenoid, VDC Switching Valve, and Circuits
- Inspection 8 Actuator Motor, Motor Relay, and Circuit
- Inspection 9 Actuator Relay and Circuit
- Inspection 10 Stop Lamp Switch and Circuit
- Inspection 11 VDC/TCS/ABS Control Unit Power Circuit
- Inspection 12 When "SHIFT POSITION ERROR" Appears in Self-Diagnosis Results Display
- Inspection 13 When "EMERGENCY BRAKE" Appears on Self-Diagnosis Results Display
- Inspection 14 When "STEERING ANGLE SENSOR HAS NOT BEEN CORRECTED" Appears on Self-Diagnosis Results Display
- Inspection 15 Brake Fluid Level in Reservoir Tank, Communication Circuit Between VDC/TCS/ABS Control Unit and Brake Fluid Level Sensor
- Inspection 16 CAN Communications Lines, VDC/TCS/ABS Control Unit and Steering Angle Sensor System
- Inspecting Components
- Symptom 1 ABS Works Frequently.
- Symptom 2 Unexpected Pedal Reaction
- Symptom 3 Long Stopping Distance
- Symptom 4 ABS Does Not Work.
- Symptom 5 Pedal Vibration and Noise
- Symptom 6 VDC OFF Indicator Lamp Does Not Illuminate.
- Symptom 7 SLIP Indicator Lamp Does Not Illuminate.
- Symptom 8 Vehicle Behaves Jerkily During VDC/TCS/ABS Operation.
- Wheel Sensors
- VDC/TCS/Abs Control Unit
- Sensor Rotor
- VDC/TCS/Abs Actuator
- G Sensor
- Steering Angle Sensor