DTC Confirmation Procedure

CAUTION: Always drive vehicle at a safe speed

NOTE: If DTC confirmation procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

TESTING CONDITION

Step 3 may be conducted with the drive wheels lifted in the shop or by driving the vehicle. If a road test is expected to be easier, it is unnecessary to lift the vehicle.

With CONSULT-II

Start engine.
Select DATA MONITOR mode with CONSULT-II. See Figure.
Drive the vehicle at more than 40 km/h (25 MPH).
If DTC is detected, Go to DIAGNOSTIC PROCEDURE .

With GST

Follow the procedure with CONSULT-II above.