Active Test
ACTIVE TEST MODE
| Test Item | Description |
|---|---|
| Retained PWR | This Test Is Able To Supply RAP Signal (Power) From BCM (Body Control Module) To Power Window System And Power Sunroof System (If Equipped). Those Systems Can Be Operated When Turning On "RETAINED PWR" On CONSULT-II Screen Even If The Ignition Switch Is Turned OFF. |
| Retained PWR | NOTE: During This Test, CONSULT-II Can Be Operated With Ignition Switch In "OFF" Position. "RETAINED PWR" Should Be Turned "ON" Or "OFF" On CONSULT-II Screen When Ignition Switch Is ON. Then Turn Ignition Switch OFF To Check Retained Power Operation. CONSULT-II Might Be Stuck If "RETAINED PWR" Is Turned To "ON" Or "OFF" On CONSULT-II Screen When Ignition Switch Is OFF. |