Fuel Pressure Release

With CONSULT-II 

1. Turn ignition switch ON.
2. Perform FUEL PRESSURE RELEASE in WORK SUPPORT mode with CONSULT-II.
3. Start engine.
4. After engine stalls, crank it two or three times to release all fuel pressure.
5. Turn ignition switch OFF.
   Fig 1: Using CONSULT-II To Release Fuel Pressure

   Courtesy of NISSAN MOTOR CO., U.S.A.

Without CONSULT-II 

1. Remove fuel pump fuse located in IPDM E/R.
   Fig 2: Locating Fuel Pump Fuse In IPDM E/R

   Courtesy of NISSAN MOTOR CO., U.S.A.
2. Start engine.
3. After engine stalls, crank it 2 or 3 times to release all fuel pressure.
4. Turn ignition switch OFF.
5. Reinstall fuel pump fuse after servicing fuel system.