Intake Valve Timing Control Position Sensor

Disconnect intake valve timing control position sensor harness connector.
Loosen the fixing bolt of the sensor.
Remove the sensor. See Figure .
Visually check the sensor for chipping.
Check resistance as shown in Fig 2 .

Fig 1: Checking Intake Valve Timing Control Position Sensor Resistance
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 2: Intake Valve Timing Control Position Sensor Terminal Resistance Specifications
Courtesy of NISSAN MOTOR CO., U.S.A.
If NG, replace intake valve timing control position sensor.