Method B

Remove No.1 ignition coil.

Fig 1: Removing No.1 Ignition Coil
Courtesy of NISSAN MOTOR CO., U.S.A.
Connect No. 1 ignition coil and No. 1 spark plug with suitable high-tension wire as shown, and attach timing light clamp to this wire.

Fig 2: Attaching Timing Light Clamp To Suitable High Tension Wire
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: Identifying High Tension Wire And Insulating Tape Length
Courtesy of NISSAN MOTOR CO., U.S.A.
Check ignition timing.

Fig 4: Checking Ignition Timing
Courtesy of NISSAN MOTOR CO., U.S.A.