Support Bearing

WARNING: This page is about a different car, the 2008 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

Remove dust shield using a suitable tool.

Fig 1: Identifying Dust Shield
Courtesy of NISSAN MOTOR CO., U.S.A.
Remove snap ring using a suitable tool.

Fig 2: Identifying Snap Ring
Courtesy of NISSAN MOTOR CO., U.S.A.
Press support bearing assembly off drive shaft using a suitable tool.

Fig 3: Pressing Support Bearing Assembly
Courtesy of NISSAN MOTOR CO., U.S.A.
Separate support bearing from retainer using a suitable tool.

Fig 4: Separating Support Bearing
Courtesy of NISSAN MOTOR CO., U.S.A.