LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2004 >> I35 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> DTC P0442: EVAP Control System >> DTC Confirmation Procedure >> With GST
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With GST

NOTE: Be sure to read the explanation of Driving Pattern on DRIVING PATTERN  before driving vehicle.
  1. Start engine.
  2. Drive vehicle according to DRIVING PATTERN  .
  3. Stop vehicle.
  4. Select MODE 1 with GST.
    • If SRT of EVAP system is not set yet, go to the following step.
    • If SRT of EVAP system is set, the result will be OK.
  5. Turn ignition switch OFF and wait at least 10 seconds.
  6. Start engine.

    It is not necessary to cool engine down before driving. 

  7. Drive vehicle again according to the DRIVING PATTERN  .
  8. Stop vehicle.
  9. Select MODE 3 with GST.
    • If P0442 is displayed on the screen, go to DIAGNOSTIC PROCEDURE  .
    • If P0441 is displayed on the screen, go to Diagnostic Procedure for DTC P0441, DIAGNOSTIC PROCEDURE  .
    • If P0441 and P0442 are not displayed on the screen, go to the next step.
  10. Select MODE 1 with GST.
    • If SRT of EVAP system is set, the result will be OK.
    • If SRT of EVAP system is not set, go to step 6.