LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2004 >> I35 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System >> DTC P0461: Fuel Level Sensor >> Overall Function Check >> With GST
April 5, 2026: LEMON Manuals is launched! Read the announcement.

With GST

NOTE: Start from step  11 , if it is possible to confirm that the fuel cannot be drained by 30l (7-7/8 US gal, 6-5/8 Imp gal) in advance.
  1. Prepare a fuel container and a spare hose.
  2. Release fuel pressure from fuel line, refer to FUEL PRESSURE RELEASE  .
  3. Remove the fuel feed hose on the fuel level sensor unit.
  4. Connect a spare fuel hose where the fuel feed hose was removed.
  5. Turn ignition switch OFF.
  6. Set voltmeters probe between ECM terminal 69 (fuel level sensor signal) and ground.
  7. Turn ignition switch ON.
  8. Check voltage between ECM terminal 69 and ground and note it.
  9. Drain fuel by 30l (7-7/8 US gal, 6-5/8 Imp gal) from the fuel tank using proper equipment.
  10. Fill fuel into the fuel tank for 30l (7-7/8 US gal, 6-5/8 Imp gal).
  11. Confirm that the voltage between ECM terminal 69 and ground changes more than 0.03V during step 8 - 10.
  12. If NG, check component of fuel level sensor, refer to FUEL LEVEL SENSOR UNIT CHECK .
scientia non olet · About LEMON Manuals