Diagnostic Procedure
- INSPECTION START
With CONSULT-II
- Turn ignition switch ON.
- Select SELF DIAG RESULTS mode with CONSULT-II.
- Touch ERASE.
- Perform DTC CONFIRMATION PROCEDURE .
- Is the 1st trip DTC P0605 displayed again?
WITH GST
- Turn ignition switch ON.
- Select MODE 4 with GST.
- Touch ERASE.
- Perform DTC CONFIRMATION PROCEDURE .
- Is the 1st trip DTC P0605 displayed again?
Yes or No
- Yes: GO TO 2.
- No: INSPECTION END
- REPLACE ECM
- Replace ECM.
- Perform initialization of IVIS (NATS) system and registration of all IVIS (NATS) ignition key IDs. Refer to IVIS (INFINITI VEHICLE IMMOBILIZER SYSTEM - NATS) .
- Perform ACCELERATOR PEDAL RELEASED POSITION LEARNING .
- Perform THROTTLE VALVE CLOSED POSITION LEARNING .
- Perform IDLE AIR VOLUME LEARNING .
- : INSPECTION END