With GST

NOTE: Be sure to read the explanation of SRT DRIVING PATTERN . before driving vehicle.

Start engine.
Drive vehicle according to SRT DRIVING PATTERN .
Stop vehicle.
Select "MODE 1" with GST.
- If SRT of EVAP system is not set yet, go to the following step.
- If SRT of EVAP system is set, the result will be OK.
Turn ignition switch OFF and wait at least 10 seconds.
Start engine.
It is not necessary to cool engine down before driving.
Drive vehicle again according to the SRT DRIVING PATTERN .
Stop vehicle.
Select "MODE 3" with GST.
- If P0455 is displayed on the screen, go to DIAGNOSTIC PROCEDURE .
- If P0442 is displayed on the screen, go to DIAGNOSTIC PROCEDURE .
- If P0441 is displayed on the screen, go to DIAGNOSTIC PROCEDURE .
- If P1442 is displayed on the screen, go to DIAGNOSTIC PROCEDURE .
- If P0455, P0441, P0442 and P1442 are not displayed on the screen, go to the following step.
Select "MODE 1" with GST.
- If SRT of EVAP system is set, the result will be OK.
- If SRT of EVAP system is not set, go to step 5.