April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Control Module

Fig 1: Identifying Fuel Pump Control

G00796394

Courtesy of NISSAN MOTOR CO., U.S.A.

Start engine and warm it up to normal operating temperature.
Turn ignition switch OFF and wait at least 10 seconds.
Check voltage between FPCM terminal 4 and ground under the following conditions.

Fig 2: Inspecting Conditions Chart
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: Checking Voltage Between Terminal 4 & Ground
Courtesy of NISSAN MOTOR CO., U.S.A.
If NG, replace fuel pump control module.