4. Perform DTC Confirmation Procedure

With CONSULT-II 

1. Turn ignition switch ON.
2. Select "SELF DIAG RESULTS" mode with CONSULT-II.
3. Touch "ERASE".
4. Perform "DTC Confirmation Procedure". 

   See DTC Confirmation Procedure  .

5. Is the 1st trip DTC P1065 displayed again?

With GST 

1. Turn ignition switch ON.
2. Select MODE 4 with GST.
3. Touch "ERASE".
4. Perform "DTC Confirmation Procedure". 

   See DTC Confirmation Procedure  .

5. Is the 1st trip DTC P1065 displayed again?

Yes or No 

Yes : GO TO 5.

No : INSPECTION END