Auto Cruise Control System
- Precautions
- Preparation
- Description
- Action Test
- ICC System Running Test
- Vehicle-To-Vehicle Distance Control Mode
- Set Checking
- Check For Increase Of The Cruising Speed
- Check For Decrease Of The Cruising Speed
- Check For The Cancellation Of Vehicle-To-Vehicle Distance Control Mode (Normal Driving Condition) In The Following Cases:
- Check For Restoring The Speed That Is Set By Vehicle-To-Vehicle Distance Control Mode Before Cancellation
- Check On/Off Switch Operation
- Check For ACCEL/RES, COAST/SET, CANCEL Switches
- Check For Distance Switch
- Conventional (Fixed Speed) Cruise Control Mode
- Set Checking
- Check For Increase Of The Cruising Speed
- Check For Decrease Of The Cruising Speed
- Check For The Cancellation Of Conventional (Fixed Speed) Cruise Control Mode (Normal Driving Condition) In The Following Cases:
- Check For Restoring The Speed That Is Set By Conventional (Fixed Speed) Cruise Control Mode Before ICC Cancellation
- Check On/Off Switch Operation
- Check For ACCEL/RES, COAST/SET, CANCEL Switches
- Vehicle-To-Vehicle Distance Control Mode
- ICC System Running Test
- Laser Beam Aiming Adjustment
- Electrical Units Location
- Wiring Diagram
- Terminals And Reference Value
- Trouble Diagnosis - General Description
- Trouble Diagnosis For Self-Diagnostic Items
- Diagnostic Trouble Code (DTC) Chart
- DTC 11: Control Unit
- DTC 12: VDC Control Unit
- DTC 20: Can Comm Circuit
- DTC 31, 34: Power Supply Cir 1, Power Supply Cir 2
- DTC 41: VHCL Speed Se CIRC
- DTC 43: VDC/TCS/Abs CIRC
- DTC 45: Brake SW/Stop L SW
- DTC 46: Operation SW CIRC
- DTC 74: Laser Beam Off Center
- DTC 90: Stop Lamp RLY Fix
- DTC 92: ECM Circuit
- DTC 96: NP Range
- DTC 97: At Circuit
- DTC 98: Gear Position
- DTC 102: Laser Stain
- DTC 103: Laser Sensor Fail
- DTC 104: Laser Aiming INCMP
- DTC 107: Laser Comm Fail
- DTC 109: Laser High Temp
- Trouble Diagnosis For Symptoms
- Symptom Chart
- Symptom 1: On/Off Switch Does Not Switch On , On/Off Switch Does Not Switch Off
- Symptom 2: The ICC System Cannot Be Set (On/Off Switch Turns On/Off)
- Symptom 3: The ICC System Cannot Be Operated By The Cancel Switch, ACCEL/Res Switch, Or Distance Switch
- Symptom 4: The ICC System Is Not Cancelled When The Gear Is In Other Than 'D'
- Symptom 5: Chime Does Not Sound
- Symptom 6: Driving Force Is Hunting
- Symptom 7: The ICC System Frequently Cannot Detect The Vehicle Ahead/The Detection Zone Is Short
- Symptom 8: The System Does Not Detect The Vehicle Ahead At All
- Electrical Component Inspection
- Removal And Installation