With Consult-II
- Start engine (VDC switch OFF).
- Select "DATA MONITOR" mode with CONSULT-II.
- Drive the vehicle for at least 5 consecutive seconds under the following conditions.DRIVING CONDITION
VHCL SPEED SE More than 30 km/h (19 MPH) Selector lever Suitable position If DTC is detected, go to DIAGNOSTIC PROCEDURE .
If DTC is not detected, go to the following step.
- Drive the vehicle for at least 5 consecutive seconds under the following conditions.DRIVING CONDITION
VHCL SPEED SE More than 30 km/h (19 MPH) Selector lever Suitable position Driving location Depress the brake pedal for more than five seconds so as not to come off from the above-mentioned condition. - If DTC is detected, go to DIAGNOSTIC PROCEDURE .