Intake Valve Timing Control Position Sensor

Disconnect intake valve timing control position sensor harness connector.
Loosen the fixing bolt of the sensor.
Remove the sensor.
Visually check the sensor for chipping.

Fig 1: Identifying Intake Valve Timing Control Position Sensor
Courtesy of NISSAN MOTOR CO., U.S.A.
Check resistance as shown below.

Fig 2: Terminal Resistance Description Chart
Courtesy of NISSAN MOTOR CO., U.S.A.

Fig 3: Checking Resistance
Courtesy of NISSAN MOTOR CO., U.S.A.
If NG, replace intake valve timing control position sensor.