With Consult-II
- Start engine (VDC switch OFF).
- Select "DATA MONITOR" mode with CONSULT-II.
- Press MAIN switch and make sure that CRUISE lamp lights up.
- Drive the vehicle for at least 5 consecutive seconds under the following conditions.VHCL SPEED SE AND MORE THAN 30 KM/H (19 MPH)
VHCL SPEED SE More than 30 km/h (19 MPH) Selector lever Suitable position If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
If 1st trip DTC is not detected, go to the following step.
- Drive the vehicle for at least 5 consecutive seconds under the following conditions.VHCL SPEED SEE AND MORE THAN 30 KM/H (19 MPH)
VHCL SPEED SEE More than 30 km/h (19 MPH) Selector lever Suitable position Driving location Depress the brake pedal for more than five seconds so as not to come off form the above-mentioned vehicle speed. - If 1st trip DTC is detected, go to "DIAGNOSTIC PROCEDURE ".