LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Infiniti >> 2005 >> Q45 >> Repair and Diagnosis (Single Page) >> Engine Performance >> Testing & Diagnosis >> Engine Control System - System Testing >> ICC Brake Switch >> Component Inspection >> ICC Brake Switch
April 5, 2026: LEMON Manuals is launched! Read the announcement.

ICC Brake Switch

  1. Turn ignition switch OFF.
  2. Disconnect ICC brake switch harness connector.
  3. Check continuity between ICC brake switch terminals 1 and 2 under the following conditions.
    ICC BRAKE SWITCH CONTINUITY CHECKING CONDITIONS

    Condition Continuity
    When brake pedal: Fully released. Should exist.
    When brake pedal: Slightly depressed. Should not exist.

    If NG, adjust ICC brake switch installation, refer to "BRAKE PEDAL ", and perform step 3 again.

    Fig 1: Checking Continuity Between ICC Brake Switch Terminals 1 And 2
    G02369889Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals